High Grade Aluminum Overdoor Heaters Public Places Elevator 3.36W 467mm Axial Cross Flow Fan

Overview

Basic Info.

Model NO.	PC30B24420C
Air Flow	61.79 Cfm
Acoustical Noise	35 dB(a)
Rated Voltage	24 VDC
Input Current	0.14 a
Rated Speed	2400 Rpm
Transport Package	Standard Exporting Package
Specification	DC Motor
Trademark	PBM
Origin	China
HS Code	8414519900
Production Capacity	50, 000PCS/Year

Product Description

Product Description

High Grade Aluminum Overdoor Heaters Public Places Elevator 3.36W 467Mm Axial Cross Flow FanModel:PC30B24420C

PBM tangential blowers combine 30~80mm diameter cross flow impeller with one single piece length maximum to 65mm, with AC and DC power supply EC green technology motor, with aluminum die cast fan frame, with anti-vibration rubber damping pad system, with ball bearing and sleeve bearing, maximum entire tangential fan length goes up to 1190mm at single, double and triple sections harmoniously connected together makes it possible to achieve a very high airflow throughput ratio with extremely low wind noise with quiet three-core sin-wave integrated commutation electronics motor controller circuit and low air flow velocity. Cross flow blowers are available for home indoor stove, fireplace, oven, wood burner underfloor convectors, air doors, air curtains, air conditioners and heaters' cooling and ventilation at extremely shallow, flat design to satisfy home appliances' nice outlooking and slim features that market requirements and consumer calling for. Low noise with high air flow rates and low back pressures, compact slim design with anti-vibration rubber mechanical soft connection system, moisture proof and water proof versions are available for entire range tangential blowers with integrated and intelligence EC technology motor with PWM signal and 0~10V analog voltage to adjust power, and ErP2015 (Energy-related Products) directive conformity.

Impeller Sizes: from 30mm to 80mm diameter;Sound Level: from 32dBA to maximum 48dBA according different rotation speed;Airflow: maximum to 600CMH, Cubic Meter per Hour, equal to approx. 353CFM , Cubic Feet per Minute;Air Pressure: Maxim to 80Pa, equal to 8.16mm H2O and to 0.32 inches H2O;Power: Maximum motor input power goes to 100W motor diameter 80mm.

Product Parameters

General Characters:

1-1	Rated Voltage	24 VDC
1-2	Operating Voltage	16 ~ 28 VDC
1-3	Rated Speed	2400 RPM
1-4	Input Current	0.14 A
1-5	Input Power	3.36 W
1-6	Acoustical Noise	35 dB(A)
1-7	Life Expectance	50,000Hours(L10)At 40ºC room, humidity 15%~65%RH.
1-8	Direction of Rotation	Clockwise seen on motor
1-9	Insulation Class	Class B
1-10	Insulation Resistance	50 Mega Ohm minimum at 500VDCBetween frame and (+) terminal
1-11	Motor Protection	Locked rotor protectionPolarity protectionAutomatic restart capability
1-12	Speed Control	Control input 0~10VDC
1-13	Dielectric Strength	5mA maximum at 500VAC 50Hz five secondBetween frame and (+) terminal
1-14	Air Flow	61.79 CFM / 105 m3/H
1-15	Static Pressure	1.43 mmH2O / 14 Pa
1-16	Protection Type	IP44

Environmental Characters:

2-1	Dimension	45 x 45 x 467 (see dimension drawing)
2-2	Material of Impeller	Aluminum alloy
2-3	Number of Blades	22
2-4	Bearing System	NMB ball bearing
2-5	Mounting Position	Any
2-6	Lead Wire	Red , Black, White AWG22#
2-7	Package	Standard

Electrical Protection

3-1	Locked-rotor Protection	Over-current limiting circuit protects motor from damage at least for 72 hours of locked rotor condition at rated voltage.
3-2	Reverse Polarity Protection	No damage if the positive and negative leads are reversed under maximum operation voltage conditions.
3-3	Over Voltage Protection	The circuit will be shut down automatically when input voltage over 15VDC. And re-started when Voltage down to 15VDC below.
3-4	Soft Start	In 5 seconds after power on and speed control voltage gets to 1.5V.
3-5	RoHS	All the material meets RoHS standard.

Environmental Characters

4-1	Operating Temperature	-25ºC to 60ºC
4-2	Storage Temperature	-40ºC to 75ºC
4-3	Operating Humidity	5% to 90% RH
4-4	Storage Humidity	5% to 95% RH
4-5	RoHS	All the material meets RoHS standard.

Performance Curve:

Testing ConditionInput Voltage----Operating voltage (24 VDC)Temperature-----Room temperatureHumidity---------65%RHTest distance-----1m
Outline Drawing

Note1. Connection line 3X (Red, Black, White AWG22#);Red=+24VDC, White=0-10VDC, Blue=GND.
Safety Requirements

1. Make sure that the metal casing of the stator connected to the ground before being powered on.
2. If the fan doesn't work after been powered on, please check the speed control input voltage, it may not be well connected. To prevent the suddenly start of the fan to hurt hands or other personal injury; do not touch the impellers or rotor when the power is on.
3. Fan needs a few seconds to start after being powered on. To prevent personal injury, do not touch the impellers or rotor when the power is on or in a low speed.
4. Unless they are instructed by the person(s) responsible for their safety, those who are lack of physical, mental or sensory capacities and proper practical experience or expertise cannot use this appliance. Please do not let the children play with this product.
5. If the power cord be damaged, the power cord must be replaced by the manufacturer in order to avoid accident of the proxy service personnel or the equivalent qualification maintenance personnel.
6. As an integral part of the fan, this DC motor cannot be used alone without impeller or load.
7. Please carefully read this technical specification before using the product.

Recommend Products

Products of the same series

ModelPart No.	Rated VoltageVDC	Air FlowM3/H	Air PressurePa	Rated SpeedRPM	Sound LeveldB(A)	TotalLengthmm
PC30B1298C	12	35	17	3000	29	145
PC30B2498C	24	35	17	2800	29	145
PC30B12160C	12	42	15	2700	30	207
PC30B24160C	24	42	15	2600	30	207
PC30B12198C	12	52	14	2700	31	245
PC30B24198C	24	52	14	2500	31	245
PC30B12248C	12	55	14	3000	32	295
PC30B24248C	24	55	14	3000	32	295
PC30B12300C	12	72	13	2800	33	347
PC30B24300C	24	72	13	2800	33	347
PC30B12352C	12	84	13	2500	34	399
PC30B24352C	24	84	13	2550	34	399
PC30B12420C	12	105	14	2400	35	467
PC30B24420C	24	105	14	2400	35	467

Company Profile

Certifications

Packaging & Shipping

FAQ

Q:How about the delivery time ?
A:Within 25 days after we receive the order.

Q:What kind of payments do you support?
A:T/T & L/C, other types please contact us.
Q: What's the MOQ?
A: Generally speaking, the MOQ is 100 pieces. Different products have different MOQ. Please contact us.
Q: Transportation?
A: All available shipping ways could be applied, by courier, air or sea. Appointed shipping company or our own forwarders all could be used in shipment Full-way tracking the cargos for you before the goods arrive.